Filter
Top Products
24
AXIS Q1755/-E - PTZ (Pan Tilt Zoom)
Controls
Panel Shortcut Command Buttons
Here are the controls for creating and saving shor
tcut command buttons. These buttons can provide
direct access to various built-in auxiliary commands provided by the PT driver. The buttons are
displayed in the Control Panel, which is available on the Live View page by clicking the Ctrl panel
button. See
PTZ (Pan Tilt Zoom),
on page 23 for information on the PT driver.
The CTRL panel also provides standard buttons, autofocus, backlight compensation, IR cut filter
and brightness. The list of shortcut command buttons displays the
available information for
each configured command button.
• The Label is the text on the button itself
• Information is the text displayed for the button w
hen the cursor is held over the button
• URL shows the path to the command
Enable - Shows whether t
he selected command is enabled or not. This is controlled by the
Enable/Disable button below the list.
To work with shortcut command buttons, click Add
to create a new button, or select an existing
button from the list and click Modify or Remove.
Enable/Disable controls
Enable or disable the PTZ by checking/unchecking
these boxes. When disabled, the Pan, Tilt, Zoom and Focus sliders will not be
available on the Live View page or any other page with the video stream included.
Note:
P
an/Tilt are available only if there is a PT device connected to the AXIS Q1755/-E.
Control Queue
The PTZ Control Queue is a system for placing PTZ control requests in a queue. The control queue fields on the Live View page
show the user's current status and position in the queue and the amount of time remaining until PTZ control is given, or if the
user already has control - the amount of control time remaining.
Control Queue Settings
Enable PTZ Control Queue - This enables the queuing function and displays the user's status and position in the queue on
the Live View page.
Limit number of users in queue to - This can be specified up to 100. The default value is 20.
Control queue poll time - To keep the control queue up-to-date, the waiting
clients must regularly poll the AXIS Q1755/-E
to keep their place in the queue. If the client does not send a new poll query within the time set here (in seconds), the client
will be dropped from the queue.
Setting a higher value can lead to greater numbers of 'dead' reques
ts in the queue, i.e. when clients leave the queue. Setting
too low a value, so that clients are required to send frequent poll queries, may result in the AXIS Q1755/-E becoming
overloaded.
Click Save to sav
e the settings.