Filter
Top Products
AXIS P3367–VE Fixed Dome Network Camera
Detectors
Set up motion detection
To set up a motion detection Include Window, f ollow these instructions:
1. Go to Detectors > Motion Detection.
2. Se lect a des ire d resolution for viewing while setting up Motion Detection from the View in list.
3. Select the Configure Included Windows option and click New. Se lect the new w indow in the list of windows and ente r
adescriptivename.
4. Ad just the size (drag the b ottom right-hand corner) and the position (click on the text at the top and drag to the desired
position) of the active window (window w ith red frame).
5. Adjust the Object Size, History and Sensitivity profile sliders (see Motion detection parameters for details). Any detected
motion within an active window is indicated by red peaks in the Activity window.
6. C lick Save.
To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the
include window.
To delete an include or exclude window, select the window in the list of windows and click Del.
It is also possible c reate a motion detection window from a view area. Select the view area and click Create.
Motion detection parameters
The parameters controlling motion detection are described in the table below:
Parameter
Object Size
History
Sensitivity
Description
Object size relative to window
size.
Object memory length.
Difference in lumi
nance
between background and
object.
High level (
100%)
Only very l
arge objects trigger
motion detection.
An object that appears in
the window triggers motion
detection for a long time
before it is considered as
non-moving.
Ordinary c
olored objects on
ordinary backgrounds trigger
motion detectio n.
Medium level (50%)
A large difference in luminance
is required to trigger motion
detection.
28