Filter
Top Products
EN
|
7
Bosch Security Systems | January 26, 2005
LTC 9385 Series | Instruction Manual | Unpacking
1.0 UNPACKI NG
This electronic equipment should be unpacked and
handled carefully.
Check for the following items:
Quantity Part Description
11/4-20 x 3/8in. BHCS (Button Head Cap
Screw)
11/4-20 x 1/2in. BHCS
11/4-20 x 5/8in. BHCS
11/4-20 x 3/4in. BHCS
11/4-20 x 7/8in. BHCS
43.2mm (0.125in.) plastic spacer
4 0.4mm (0.016in.) plastic spacer
2 Nylon bushings
13/8in. NPT plug
1Small flex fitting
2Pull Seals
2 Large flex fitting
3 Cable ties
If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.
If any items are missing, notify your Bosch Security
Systems Inc. Sales Representative or Customer Service.
The shipping carton is the safest container in which the
unit may be transported. Save it for possible future use.
2.0 SERVICE
If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems, Inc.
Service Center for return authorization and shipping
instructions.
Service Centers
USA
Phone: 800-366-2283 or 717-735-6638
fax: 800-366-1329 or 717-735-6639
CCTV Spare Parts
Phone: 800-894-5215 or 408-956-3853 or 3854
fax: 408-957-3198
e-mail: BoschCCTVparts@ca.slr.com
Canada
Phone: 514-738-2434
Europe, Middle East & Asia Pacific Region
Phone: 32-1-440-0711
For additional information, see www
.boschsecurity.com.
3.0 CARE AND MAINTENANCE
There are no moving parts in this unit. Regularly
scheduled maintenance will help prolong the
operational life of this unit. Clean the viewing window
as needed with a mild, nonabrasive detergent in water
and a soft cloth.
4.0 DESCRIPTION
The LTC 9385 Series of environmental housings are
attractive aluminum enclosures designed for outdoor
CCD camera installations.
4.1 Enclosure Rating
4.1.1 NEMA-3R and IP54
The LTC 9385 Series housings include a breather hole in
the front face plate. The breather hole prevents the
accumulation of moisture inside the housing when
installed in areas of high humidity. With the breather
hole open, the LTC 9385 Series housings meet the
enclosure rating requirements of NEMA-3R and IP54.
4.1.2 NEMA-4 and IP65
For installations requiring an enclosure rating of
NEMA-4 or IP65, the breather hole must be plugged
using the pull seal (Part No. 315 2569 001) provided in
the hardware kit. Refer to Final Assembly under
INSTALLATION for proper installation.
5.0 INSTALLATION
This installation should be made by a qualified
service person and conform to all local codes.
5.1 Model Designation
Model Rated Range Power
No. Input Consumption
1
LTC 9385/60 115VAC, 50/60Hz 108 to 132 50W
LTC 9385/20 24VAC, 50/60Hz 21.6 to 26.4 50W
LTC 9385/50 230VAC, 50/60Hz 207 to 253 50W
1
Heater requires 40 watts.
Do Not Exceed 30VAC Input on 24VAC models.
Operation above 30VAC violates low voltage operation
(Class 2 Specifications). Normal operation is 24VAC.
Maximum Camera/Lens Size: Accepts cameras
up to 102W x 71H mm (4.0 x 2.8in.), lenses up to
102W x 92H mm (4.0 x 3.6in.), and camera/lens
combinations up to 345L mm (13.6in.).