Filter
Top Products
FlexiDome2X IP Camera Installation | en 27
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
5 Installation
5.1 Disassembly
5.1.1 Surface mount version
The camera/housing unit consists of the following parts:
To disassemble the unit proceed as follows:
1. Using the special screwdriver bit, loosen the three tamper-
resistant screws in the trim ring (the screws remain in
place).
CAUTION!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code or
applicable local codes.
1. Surface mount box
2. Camera module and mounting base
3. Inner liner (with sealing ring)
4. Dome
5. Trim ring