Filter
Top Products
FlexiDome2X IP Camera Browser connection | en 43
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
7 Browser connection
A computer with Microsoft Internet Explorer can be used to
receive live images from the camera, control cameras, and
replay stored sequences. The camera is configured over the
network using the browser (or via the supplied Configuration
Manager). The configuration options using the menu system of
the camera itself are limited to setting up the lens and network.
Note:
The camera can also be connected to DIBOS 900 Series,
VIDOS, Bosch Video Management System, and Divar 700 Series
Digital Video Recorder, as well as third party video management
systems.
7.1 System requirements
– Microsoft Internet Explorer version 7.0 or higher
– Monitor: resolution at least 1024 × 768 pixels, 16 or 32 bit
color depth
– Sun JVM installed
– Intranet or Internet network access
The Web browser must be configured to enable Cookies to be
set from the IP address of the unit.
In Windows Vista, deactivate protected mode on the Security
tab under Internet Options.
Read the information in the System Requirements document
on the product DVD supplied and, if necessary, install the
required programs and controls.
To play back live video images, an appropriate ActiveX must be
installed on the computer. If necessary, the required software
and controls can be installed from the product DVD provided.
a. Insert the mini-DVD into the DVD-ROM drive of the
computer. If the DVD does not start automatically,
open the root directory of the DVD in Windows
Explorer and double click MPEGAx.exe.
b. Follow the on-screen instructions.