Filter
Top Products
42 en | Camera set-up FlexiDome2X IP Camera
AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
6.2.4 Lens Wizard submenu
6.3 Day/Night switching
The camera is equipped with a motorized IR filter. The
mechanical IR filter can be removed in low-light or IR
illuminated applications by software configuration settings.
If Auto switching mode is selected, the camera automatically
switches the filter depending on the observed light level. The
switching level is programmable. In Auto switching mode the
camera prioritizes motion (the camera gives sharp images
without motion blur as long as the light level permits) or color
(the camera gives color pictures as long as the light level
permits). The camera recognizes IR illuminated scenes to
prevent unwanted switching to color mode.
There are four different methods of controlling the IR filter:
– via an alarm input,
– automatically, based on the observed light levels, or
– as part of the programmable mode profile.
Item Selection Description
Set Backfocus
now
Select to fully open the iris. Follow the
instructions for setting the backfocus
for your particular lens type.
After focusing the object of interest
remains in focus under bright and low
light conditions.
EXIT Returns to Install menu.