Filter
Top Products
High Speed Pan/Tilt System Configuring the System | en 37
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
11.2.1 Area Parameters Menu
The Area Parameters menu enables the user to show a message on the screen, depending on
the horizontal position reached by the device; this is sometimes known as sector information.
From this menu, it is possible to enter two (2) lower menus that are used to set the text for
each area, and the start and end positions (in degrees) of these areas. It is possible to set up
to eight (8) areas with their own title, start, and end positions.
For example, to activate the first title and obtain a message when the device is between +80 °
and +120 ° in the horizontal (pan) direction, proceed as follows:
1. Enter the Position Area menu.
2. Select Area 1 by pressing Focus; an arrow starts blinking next to the start position. Press
Focus again, use the joystick to enter the value +080.00 in the left column (start position
of text coming on screen), then press Focus to store that value. Repeat the process, but
put +120.00 in the right column (stop position of text removed from the screen).
3. In the Text (String) Area menu, select the first line and enter the desired text.
Note: If the area position start and end values are set to +0.00, this disables the text display.
Fig. 11.4 Area Parameters Menu
AREA PARAMETERS MENU TEXT AREA MENU EDIT TEXT MENU
1 - AREA TITLE : NO 1 - AREA 1 1 - STRING EDIT
2 - STRING AREA MENU 2 - AREA 2
3 - POSITION AREA MENU 3 - AREA 3 ------------------------------------------
4 - AREA 4 Test area 1
5 - AREA 5 ------------------------------------------
6 - AREA 6
7 - AREA 7 2 - DELETE STRING
8 - OFFSET PAN : + 0.0 8 - AREA 8
Test area 1
AREA POSITION MENU
1 - AREA 1 + 0.0 + 0.0
2 - AREA 2 + 0.0 + 0.0
3 - AREA 3 + 0.0 + 0.0
4 - AREA 4 + 0.0 + 0.0
5 - AREA 5 + 0.0 + 0.0
6 - AREA 6 + 0.0 + 0.0
7 - AREA 7 + 0.0 + 0.0
8 - AREA 8 + 0.0 + 0.0
Test area 1
Feature Description Default Options
AREA TITLE
Enables / disables the on-screen message
depending on the horizontal position reached
by the device.
NO YES, NO
STRING AREA MENU
Enables the user to edit a customized, on-
screen text message that is activated when the
device reaches a defined, horizontal position.
POSITION AREA
MENU
The horizontal position reached by the device
that prompts a customized on-screen text
message.
OFFSET PAN
Adds a corresponding value (offset) in degrees
to the pan references used for displaying the
area text. For example, if this value is set to
+45.0 ° then all references will be shifted in
PAN by +45 ° with respect to the system’s
physical reference.
+0.00
-180.00
to
+180.00