Filter
Top Products
High Speed Pan/Tilt System Maintenance | en 59
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
12 Maintenance
UPH pan/tilt devices require no particular maintenance.
12.1 Cleaning
To clean the device, use neutral detergent and a non-abrasive cloth.
12.2 Replacing the Fuses
There are two (2) preset fuses on the connection board. Sizes are related to the power supply
voltage, as shown in Table 12.1..
Fig. 12.1 Fuses on the Connection Board
Table 12.1 Fuse Values for Replacement
Voltage Fuse F1 Fuse F2
24 VAC 50/60 Hz T 4A L 250 V T 6.3A H 250 V
230 VAC 50/60 Hz T 4A L 250 V T 2A H 250 V