Filter
Top Products
High Speed Pan/Tilt System Configuring the System | en 49
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
11.3.4 Wiper-Washer
Select UPH Pan/Tilt models have a wiper option used to operate an (external) pump for clean-
ing the glass. The spray for cleaning the glass is on the outside of the pan/tilt (see
Figure 11.16). For cleaning, the UPH must be positioned with the glass facing the spray. Start
the pump for the glass cleaning liquid and then start the wiper. It is necessary to set a preset
position corresponding to the spray which is loaded when the “wiper” function is started. For
washer models with a level sensor, the UPH displays an on-screen message when the level of
liquid in the tank is too low (only if using a pump with high discharge head from the UPTWASA
Series).
Fig. 11.16 Wiper-washer Function
WIPER-WASHER MENU
1 - ENABLED : NO
2 - PRESET POSITION : 00001
3 - RELAYS NR. : 00002
4 - PUMP DELAY : 00003
5 - WIPER DURATION : 00005
6 - DELAY WIPER OFF : 00002
Fig. 11.17 Wiper-washer Menu
Feature Description Default Options
ENABLED Enables the wiper function. NO YES, NO
PRESET POSITION Enables the preset position to be
reached.
00001 00001 -
00250
RELAYS NR. Enables the relay to activate for
water pump control.
00002 00001 -
00002
PUMP DELAY The delay between the pump com-
mand and when the wiper starts
moving.
00003 00001 -
00050
WIPER DURATION The amount of time that the wiper
wipes.
00005 00001 -
00050
DELAY WIPER OFF The amount of time that the wiper
wipes without water.
00002 00001 -
00050