Filter
Top Products
11
For an S-Video Connection Between Your TV and the VS-1
ç
p
g
ç
p
g
Choosing connection types for your video sources
If you connected your TV to the VS-1 using an S-Video cable, you can only use S-Video
and Composite connections for source inputs even though a source may have compo-
nent output connections.
1. Examine the rear panel of all your source devices to determine what types of video
output connectors they have.
2. In the following table, place a check next to the type of video input connection you
plan to use for each of your video sources. Choose the type of connection that pro-
vides the highest level of video image quality. We recommend using an S-Video
connection if it is available.
Connecting your sources to the VS-1
After obtaining the cable(s) you need:
1. Plug one end of the video cable into the appropriate jack on the rear of your video
device.
2. Plug the other end of the video cable into the appropriate Video INPUT jack(s) on
the VS-1.
3. Turn to “Source Audio Connections” on page 14.
VCR CBL-SAT
AUX
(Other)
Connection
type
Video
Quality
S-Video Good
Composite Standard
DO NOT USE
DO NOT USE
DO NOT USE
If any of your sources do not have an S-Video jack, you can use a Composite
connection. Remember, the VS-1 converts this up to S-Video format.