Open as PDF
Mounting Your VS-1 on a Wall
Install two screws eight inches
apart. Leave ¼ in (6 mm) between
wall surface and screw head.
Position the VS-1 over the screws
so that it is flush with the wall.
Lower the VS-1 onto the screws
to lock it in place.
For solid wood
-in (3.5 mm) drill bit
Use drill size
type of wall
No. 8 x 1½-in
(M4 x 36 mm)
No. 8 x 1½-in (M4 x 36 mm) wood or machine
screws (depends on type of wall anchor)
No. 8 (M4)