Cannon FS10/FS11/FS100 Camcorder User Manual


 
63
If the still image index screen is
displayed, move the zoom lever
toward T to display a single image.
appears and changes to .
The (print/share) button lights
up and the current print settings
will be displayed for approx.
6 seconds.
IMPORTANT
If continues to flash (for more than 1
minute) or if does not appear, the
camcorder is not correctly connected to
the printer. In such case, disconnect the
USB cable and turn off the camcorder
and the printer. After a short while, turn
them on again, set the camcorder to
mode and restore the connection.
During the following operations, even if
you connect a printer to the camcorder
it will not be recognized.
- Erasing all still images
- Erasing all transfer orders
- Erasing all print orders
NOTES
will appear for images that cannot be
printed.
We recommend powering the
camcorder using the compact power
adapter.
Refer also to the printer’s instruction
manual.
If you have no intention to use the
optional DW-100 DVD Burner, you can
set [USB SETTING] to [ PC/PRINTER]
( 80) so the device type selection
screen does not appear every time you
connect the camcorder to a printer.
Connection to a PictBridge-compatible
printer will not work when the memory
card contains 1,800 images or more.
For best performance, we recommend
keeping the number of images on the
memory card under 100.
Disconnect the USB cable before
changing the mode dial.
Printing with the (Print/Share)
Button
You can print a still image without
changing the settings simply by
pressing .
1 Select ( ) the still image you
wish to print.
2 Press .
Printing starts. The button
flashes and stays on when the
printing is completed.
To continue printing, select ( )
another still image.
Selecting the Print Settings
You can select the number of copies
and other settings for printing. The
setting options vary depending on your
printer model.
( 24)