Filter
Top Products
Additional Information
86
List of Messages
Following the list of messages for the camcorder you can find separate lists for
printing-related messages ( 90) and for messages that appear only when using the
optional DW-100 DVD Burner ( 89).
ACCESSING THE CARD DO NOT REMOVE THE CARD
- You opened the memory card slot cover while the camcorder was accessing the memory card or the
camcorder started accessing the memory card as you opened the memory card slot cover. Do not remove the
memory card until this message disappears.
BACK UP RECORDINGS REGULARLY
- This message may appear when you turn on the camcorder. In the event of a malfunction, recordings may be
lost so back up your recordings regularly ( 68).
BUFFER OVERFLOW RECORDING WAS STOPPED
- The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the
memory card with one rated Speed Class 2 or higher.
/ BUILT-IN MEMORY ERROR
- The built-in memory could not be read. This may indicate a problem with the camcorder. Consult a Canon
Service Center.
/ BUILT-IN MEMORY FULL
- The built-in memory is full ([ END] appears on the screen). Delete some recordings ( 41, 58) to free
some space.
/ CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
CANNOT COMMUNICATE WITH THE BATTERY PACK CONTINUE USING THIS BATTERY PACK?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
/
CANNOT COPY
- The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete
some recordings on the memory card ( 41, 58) or reduce the number of scenes to copy.
CANNOT EDIT
- Cannot move or delete original scenes or scenes in the playlist of the selected memory.
CANNOT EDIT CHECK THE CARD
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 30).
CANNOT ENTER THE STANDBY MODE NOW
- The camcorder cannot enter the standby mode if the remaining battery charge is too low.
CANNOT PLAY BACK
- There is a problem with the memory.
/ CANNOT PLAY BACK CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
(in alphabetical order)