Cannon FS10/FS11/FS100 Camcorder User Manual


 
71
DVD players and computers that meet
the following requirements:
Compatible with the discs you
created (DVD-R/DVD-R DL/DVD-RW
discs)
Compatible with DVD-Video
specifications
DVD playback software that is
installed and running (in the case of
computers)
Refer to the instruction manual of the
external device and make sure it is
compatible.
IMPORTANT
While the camcorder is connected to the
DVD burner, do not open the memory
card slot cover and do not remove the
memory card.
Observe the following precautions while
the ACCESS indicator on the camcorder
is on or flashing. Failing to do so may
result in permanent data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source
or turn off the camcorder or the DVD
burner.
For important information on handling
your discs, refer to Cautions
on handling.
NOTES
The FUNC. menu and setup menus
cannot be accessed while the
camcorder is connected to the DVD
burner.
Disconnect the USB cable before
changing the mode dial.
Copying your Recordings to an External
Video Recorder
You can copy your recordings by
connecting the camcorder to a VCR or
a digital video device.
Connecting
Connect the camcorder to the VCR
using Connection . Refer to
Connection Diagrams ( 67).
Recording
1 External device: Load a blank
cassette or disc and set the device
to record pause mode.
2 Camcorder: Locate the scene you
wish to copy and pause playback
shortly before the scene.
3 Camcorder: Resume the movie
playback.
4 External device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying is complete.
5 Camcorder: Stop playback.
NOTES
We recommend powering the
camcorder using the compact power
adapter.
By default, on-screen displays will be
embedded in the output video signal.
You can change the displays by
repeatedly pressing ( 49).
( 24)
DISP.