Filter
Top Products
105
E
Additional
Information
List of Messages
Message Explanation
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
Battery pack is exhausted. Replace or charge the battery pack.
Cassette is protected. Replace the cassette or change the position of
the protect switch.
Camcorder stopped operating to protect the tape. Unload and
reload the cassette.
DV cable is not connected, or the connected digital device is turned
off.
Condensation has been detected in the camcorder.
Tape reached the end. Rewind the tape or replace the cassette.
Video heads are dirty. Clean the video heads.
Appears for 1 second when you press the STANDBY button.
Lens is not correctly mounted. Turn the lens until it clicks. If the
message does not disappear, unmount and remount the lens.
You attempted to play back a copyright protected tape.
You attempted to dub a copyright protected tape. May also appear
when an anomalous signal is received during analog line-in
recording, or during analog-digital conversion of a copyright
protected tape.
SET THE TIME ZONE,
DATE AND TIME
CHANGE THE BATTERY
PACK
THE TAPE IS SET FOR
ERASURE PREVENTION
REMOVE THE CASSETTE
CHECK THE INPUT
CONDENSATION HAS
BEEN DETECTED
TAPE END
HEADS DIRTY, USE
CLEANING CASSETTE
ENTERING “POWER
STANDBY”
CHECK THE LENS
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
COPYRIGHT PROTECTED
DUBBING RESTRICTED
28
11
110
23
95
108
–
108
31
20
96
96