Cannon XL2 Camcorder User Manual


 
76
Recording with the Interval Timer
Press the start/stop button to start recording.
Interval recording starts and “INT T.” stops flashing.
When the interval is set to 30 seconds or 1 minute, the camcorders goes into record pause mode during
the recordings. When set to 5 or 10 minutes, the camcorder goes into stop mode during the recordings.
To Pause Interval Recording
Press the start/stop button.
The camcorder returns to record pause mode and “INT T.” starts flashing.
•Press the start/stop button to restart recording.
To Finish Interval Recording
1. Press the start/stop button.
2. Open the menu and select [CAMERA SETUP]. Select [INTERVAL T.], set it to [OFF] and
close the menu.
When you record for a long time (more than 12 hours), we recommend turning off the screen
display by pressing the EVF DISPLAY button.
When the display remains shown on the screen, turn off the camcorder. They will disappear in a
few hours.
The remaining tape display may not appear.