Filter
Top Products
98
Turning On the Analog-Digital Converter
Open the menu and select [VCR SETUP]. Select [AV\DV], set it to [ON] and close the
menu.
❍ Depending on the signal sent from the connected device, the conversion from analog to digital
signals might not work properly (e.g., signals that include copyright protective signals or
anomalous signals such as ghost signals).
❍ When connecting to a TV/video with SCART terminal, use a SCART adapter with input capability
(commercially available). The supplied SCART Adapter PC-A10 is for output only.
❍ For normal use, set [AV\DV] to [OFF]. If it is set to [ON], digital signals cannot be input via the
camcorder’s DV terminal.
❍ Depending on the software and the specifications of your computer, you may not be able to
transfer converted signals via the DV terminal.
❍ We recommend powering the camcorder from a household power source.
❍ You can also press the AV/DV button on the wireless controller. The setting changes with each
press of the button.
VCR SETUP AV DV••••••••OFF
( 24)