Filter
Top Products
12
Using a Household Power Source
1. Turn the POWER dial to OFF.
2. Attach the DC coupler to the camcorder.
Press lightly and slide it in the direction of the
arrow until it clicks.
3. Connect the power cord to the power
adapter.
4. Plug the power cord into a power
outlet.
5. Connect the DC coupler to the adapter.
6. Detach the DC coupler after use.
Press the BATT. RELEASE button to detach the
DC coupler.
❍ Disconnect the DC coupler from the power adapter when charging a battery pack.
❍ Turn off the camcorder before connecting or disconnecting the power adapter.
❍ If the adapter is used close to a TV, it may cause picture interference. Move the adapter away from
the TV or the aerial cable.
❍ Do not connect any products that are not expressly recommended to the power adapter.
❍ When the power adapter or battery pack is defective, the CHARGE indicator turns off, and
charging stops.
❍ The CHARGE indicator informs you about the charge status.
0-50%: Flashes once every second
50-75%: Flashes twice every second
More than 75%: Flashes 3 times every second
100%: Glows steadily
q
e
t
r
w