Filter
Top Products
108
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.
Under the [1] tab, select [Beep], then
press <0>. Select [Off], then press
<0>.
This prevents shooting if there is no card in the camera.
Under the [1] tab, select [Shoot w/o
card], then press <0>. Select [Off],
then press <0>.
If there is no card installed and you press
the shutter button, “Card” will be
displayed in the viewfinder, and you
cannot release the shutter.
How long the image is displayed on the LCD monitor immediately after
capture can be set. If [
Off
] is set, the image review will not be displayed. If
[
Hold
] is set, the image review will be displayed up until the [
Auto power
off
] time. During the image review, if you operate any camera controls such
as pressing the shutter button halfway, the image display will end.
Under the [1] tab, select [Review time],
then press <0>. Set the time, then
press <0>.
Handy Features
3 Silencing the Beeper
3 Card Reminder
3 Setting the Image Review Time