Filter
Top Products
Auto Exposure Bracketing*
Follow steps 1 and 2 to turn off the AEB amount display.
The AEB setting will also be canceled automatically if the power
switch is set to <OFF>, flash recycling is completed, etc.
Using AEB with continuous shooting:
If <D_j> continuous shooting (p.86) has been set and you press the
shutter button completely, the three bracketed shots will be taken
continuously in this sequence: Standard exposure, decreased
exposure, and increased exposure.
Using AEB with <1-3> single shooting:
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be exposed in the following
sequence: Standard exposure, decreased exposure, and increased
exposure.
Using AEB with the self-timer:
If you use the self-timer <_> <_2 > (p.87), the three bracketed
shots wiii be taken continuously after 10 sec. or 2 sec. With <63c>
(p.87) set, the number of continuous shots will be three times the
number set.
I_ Neither flash nor bulb exposures can be used with AEB.
, if [1_11:Auto Lighting Optimizer] (p.107) is set to any setting other than
[Disable], the AEB's effect might be minimal.
1O4