Filter
Top Products
Manual Sensor Cleaning _
if dust adhere to the image sensor and dust spots appear on the
images, you can clean the image sensor yourself with a camera blower.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
Select [Clean manually].
Under the [_:] tab, select [Clean
manually], then press < _-_>.
Select [OK].
Select [OK], then press <_-_>.
in a moment, the reflex mirror will
Iockup and the shutter will open.
Clean the sensor.
End the cleaning.
Set the power switch to <OFF>.
Forthe power source, usingAC Adapter KitACK-E10 (soldseparately)
is recommended.
Ufyou use a battery, makesure it isfully recharged.
173