Filter
Top Products
Setting the Date and Time
20
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, [Card locked!] will appear on the screen and you will not be able to take
or erase images.
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
● Press the ON/OFF button.
XThe Date/Time screen will appear.
Set the date and time.
● Press the qr buttons to choose an
option.
● Press the op buttons or turn the  dial
to set a value.
● If you choose and press the op
buttons or turn the  dial and choose
, you will set the time to daylight saving
(1 hour ahead).
Make the setting.
● Press the m button.
XOnce the date and time have been set,
the Date/Time screen will close.
● Press the ON/OFF button to turn off the
camera.
If the date/time battery is depleted, or you have not set the date and time, the
Date/Time screen will appear each time you turn on the camera. Set the correct
date and time.
What is the write-protect tab?
Setting the Date and Time
Reappearing Date/Time screen