Filter
Top Products
79
You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Choose $.
● Press the o button, then use the op
buttons or turn the  dial to choose $,
then press the n button.
Choose the settings.
● Press the op buttons to choose [Delay]
or [Shots].
● Press the qr buttons or turn the  dial
to choose a value, then press the m
button.
● Follow Step 3 on p. 63 to shoot.
• Exposure and white balance settings are set with the first shot.
• When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
You can use a TV to display the camera screen content while shooting.
•
Connect the camera to a TV as described in “Viewing Images on a TV” (p. 115).
• Shooting procedures are the same as when using the camera’s monitor.
You cannot use touch operations however.
Customizing the Self-Timer
What if the number of shots is set to two or more shots?
• If the flash fires, the shooting interval may be longer.
• If you set a high number of shots, the shooting interval may be longer.
• If the memory card becomes full, shooting stops automatically.
TV display is not available when using the HDMI Cable HTC-100 (sold
separately) to connect the camera to a high-definition TV.
Shooting Using a TV Monitor