Filter
Top Products
113
During the Live View display, you can still set the menu options. Live
View functions are listed below.
Under the [6] tab and [Live View/Movie
func. set.] menu, you can set the
following functions.
The functions settable in this menu
screen only apply during Live View
shooting and Movie shooting. These
functions do not take effect during
viewfinder shooting.
Grid display
With [Grid 1 ] or [Grid 2 ], you can display grid lines. You can
check the camera tilt before shooting.
Silent shooting
• Mode 1
The shooting operation noise is quieter than with normal shooting
through the viewfinder. When you set the drive mode to <i>, you
can shoot continuously at approx. 3 fps.
• Mode 2
When you press the shutter button completely, only one shot will
be taken. While you keep holding down the shutter button, the
camera operation will be suspended. Then when you return to the
shutter button’s halfway position, the camera operation will
resume. The shooting noise is thereby minimized. Even if the
current drive mode is set to continuous, only a single shot will be
taken.
• Disable
If you use a TS-E lens to make vertical shift movements or use
an Extension Tube, be sure to set this to [Disable]. Setting it to
[Mode 1] or [Mode 2] will result in incorrect or irregular exposures.
When you press the shutter button completely, the shutter will
sound like it took two shots. However, only one shot will be taken.
3 Menu Function SettingsN
COPY