Filter
Top Products
224
Troubleshooting Guide
If the power is cut off while an image is being recorded to the card, the
access lamp will light/blink for a few sec. When the image recording is
completed, the power will turn off automatically.
Use a fully-charged battery (p.24).
The battery performance might be degraded. See the [7 Battery
info.] menu to check the battery’s performance level (p.212). If the
battery performance is poor, replace the battery with a new one.
If you keep displaying the Quick Control screen (p.38) or shooting with
Live View function (p.107) for a prolonged period, the number of
possible shots will decrease.
Auto power off is in effect. If you do not want auto power off to take
effect, set the [5 Auto power off] menu to [Off].
The camera cannot be used with EF-S lenses (p.31).
If a card error message is displayed, see page 30 or 231.
The access lamp still blinks even when the power switch is
set to <2>.
The battery becomes exhausted quickly.
The camera turns off by itself.
Shooting-Related Problems
The lens cannot be attached.
The card cannot be used.
COPY