Filter
Top Products
38
The shooting settings are displayed on the LCD monitor where you can
quickly select and set the functions. This is called the Quick Control
screen.
1
Display the Quick Control screen.
Press <9> straight down.
X The Quick Control screen will appear.
()
2
Set the desired setting.
Use <9> to select a function.
In the <1> (Full Auto) mode, you
can select certain drive modes (p.85)
and the image-recording quality
(p.54).
X A brief description of the selected
function is displayed on the screen’s
bottom.
Turn the <
5> or <6> dial to
change the setting.
3
Take the picture.
Press the shutter button completely to
take the picture.
X The LCD monitor turns off and the
captured image is displayed.
9 Using the Quick Control Screen
1 (Full Auto)
d/s/f/a/F
If [8C.Fn III -3: AF point selection method] is set to [1: Multi-controller
direct], the Quick Control screen cannot be displayed (p.198).
Regarding the <C> (Creative Auto) mode, see page 51.
COPY