Filter
Top Products
140
3 Menu Function Settings
Sound recording
Normally, the built-in microphone will
record monaural sound. Stereo sound
recording is possible by connecting an
external microphone (commercially
available) equipped with a stereo mini
plug (3.5mm dia.) to the camera’s
external microphone IN terminal (p.16).
When an external microphone is
connected, the sound recording will
automatically be input through the
external microphone.
[Auto] : The sound recording level will be adjusted
automatically. The auto level control will work
automatically to suit the sound volume.
[Manual] : For advanced users. You can adjust the sound
recording level to one of 64 levels.
Select [Rec. level] and look at the level meter while
turning the <5> dial to adjust the sound recording
level. While looking at the peak hold indicator (Approx.
3 sec.), adjust so that the level meter sometimes lights
up the “12” (-12 dB) mark on the right for the loudest
sounds. If it exceeds “0,” the sound will be distorted.
[Disable] : Sound will not be recorded.
When the shooting mode is set to <1> or <C>, the [Sound
recording] options will be [On/Off]. If [On] is set, the sound recording
level will be automatic ([Auto]).
The sound volume balance between L (left) and R (right) cannot be
adjusted.
The 48 kHz sampling frequency will be 16-bit recordings for both L and
R.
Level meter
COPY