Filter
Top Products
200
Troubleshooting Guide
When using Live View shooting, use a memory card (a hard disk-type
card such as MicroDrive is not recommended). A hard disk-type card
requires a lower temperature range for operation than normal memory
cards. If the temperature gets too high, the Live View shooting may
stop temporarily to prevent damage to the card’s hard disk. When the
camera’s internal temperature decreases, you can resume the Live
View shooting (p.120).
If you shoot continuously with the built-in flash at short intervals, the
flash might stop operating to protect the flash unit.
If the image has been erase-protected, it cannot be erased (p.143).
The correct date and time has not been set (p.42).
Make sure the video cable plug is connected all the way in (p.141).
Set the video OUT format (NTSC/PAL) to the same video format as
the TV (p.194).
Use the video cable that came with the camera (p.141).
Live View shooting is not possible.
The built-in flash does not fire.
Image Review & Operation
The image cannot be erased.
The shooting date and time displayed is incorrect.
No image appears on the TV screen.
COPY