Filter
Top Products
38
The shooting settings are displayed on the LCD monitor where you can
quickly select and set the functions. This is called the Quick Control
screen.
1
Display the Quick Control screen.
Press <9> straight down.
X The Quick Control screen will appear
(10 sec.).
2
Set the desired setting.
Use <9> to select the function.
In the Basic Zone modes, you can
select certain drive modes (p.89) and
the image-recording quality (p.60).
X A brief description of the selected
function is displayed on the screen’s
bottom.
Turn the <
5> or <6> dial to
change the setting.
3
Take the picture.
Press the shutter button completely to
take the picture.
X The LCD monitor turns off and the
captured image is displayed.
Using the Quick Control Screen
Basic Zone modes
Creative Zone modes
If [8C.Fn III -3: AF point selection method] is set to [1: Multi-controller
direct] (p.179), the Quick Control screen cannot be displayed.
COPY