Filter
Top Products
106
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Choose ….
● After pressing the r button, press the qr
buttons or turn the Ê dial to choose …,
then press the m button.
XOnce set, … will appear on the screen.
Shoot.
● Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
Just like with Exposure Compensation (p. 74), you can adjust the exposure
±2 stops in 1/3-stop increments when using the flash.
Select the compensation amount.
●
After pressing the
r
button, immediately
turn the
Ï
ring and select the compensation
amount, then press the
m
button.
XOnce set, ~ will appear on the screen.
Shooting with Slow Synchro
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. Additionally, you should set the [IS Mode] to [Off] when
shooting with a tripod (p. 165).
Adjusting the Flash Exposure Compensation
Safety FE
The camera automatically changes the shutter speed or aperture value when the
flash fires to avoid overexposing and blowing out the highlights in the scene.
However, if you press the n button to display the 4 tab and set [Safety FE]
to [Off] in [Flash Settings], the shutter speed and aperture value will not
automatically adjust.
COPY