Filter
Top Products
Checking the Focus
126
You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
Press the l button to switch to
the focus check display (p. 44).
XA white frame will appear where the AF
frame or face was when the focus was set.
XA gray frame will appear on a face
detected during playback.
XThe area within the orange frame appears
magnified.
Switch frames.
● Move the zoom lever toward k once.
XThe screen shown to the left will appear.
● Press the m button to move to a different
frame when multiple frames appear.
Change the magnification level or
location.
●
Use the zoom lever to change the display
size, and the
opqr
buttons to change the
display position while checking the focus.
● Pressing the n button resets the
display to Step 1.
• If you press the qr buttons or turn the Ê dial during playback, the image
will switch. If you keep the qr buttons pressed, you can fast-forward
through images.
• The power saving function (p. 51) does not work during slideshows.
• You cannot change [Play Time] if [Bubble] is chosen in [Effect].
• In single image playback, you can also start a slideshow by pressing and
holding the m button and immediately pressing the button.
Checking the Focus
COPY