Canon 4343B001 Digital Camera User Manual


 
94
The camera automatically takes three continuous shots in the following order:
one at the position set in manual focus, and one each with focus positions
preset farther and nearer. The focus adjustment can be set in 3 levels.
Choose .
After pressing the m button, press the
op buttons to choose , then press the
qr buttons or turn the Ê dial to choose
.
Set the focus.
Press the l button.
Press the qr buttons or turn the Ê dial to
make the setting.
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
Press the n button to choose [Servo
AF] in the 4 tab, then press the qr
buttons to choose [On].
Focus Bracketing (Focus-BKT Mode)
In flash settings other than ! (p. 54), Focus Bracketing is not available.
Continuous shooting (p. 84) cannot be used in this mode.
If you follow Step 1 on p. 93 to choose and immediately press the
l button, the focus bracketing screen will appear.
Only three shots will be taken, even if you use (p. 59) to set a
different number of shots.
Shooting with Servo AF
COPY