Filter
Top Products
162
If you set the mode dial to G, you can change the settings in the 4 tab
(p. 47).
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
● Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
Changing the Flash Timing
You can change the timing of the flash and shutter.
● Choose [Flash Settings], then press the
m button.
● Press the op buttons or turn the Ê dial
to choose [Shutter Sync.], then press the
qr buttons to choose a setting.
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 182 – 185).
Changing Shooting Function Settings
1st-
curtain
The flash fires right after the shutter
opens.
2nd-
curtain
The flash fires right before the shutter
closes.
COPY