Filter
Top Products
174
Connecting to a TV
You can use the supplied AV cable to shoot or playback images using
a TV.
Shooting/Playback Using a TV
1
Turn off the camera and the TV.
2
Connect the AV cable to the
camera’s A/V OUT and
DIGITAL terminal.
• Hook your fingernail or the wrist
strap toggle under the bottom edge
of the camera’s terminal cover to
open it, then insert the AV cable all
the way into the connector.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
z The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 54). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and
others
z If the video system is set incorrectly, the camera output may
not display properly.
VIDEO
Yellow
Black
AUDIO