Filter
Top Products
182
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
zConfirm the procedures in
“ appears” (p. 180).
AF-assist Beam is set to
[Off].
zIn dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 51). Take care not to obstruct
the AF-assist Beam with your hand
when used.
Subject is out of focal
range.
zShoot with the subject at the correct
focusing distance (p. 204).
zThe camera may be set to an
unintended function (such as Macro).
Cancel the setting.
The subject is hard to focus
on.
zUse the focus lock or AF lock to
shoot (p. 92).
Subject in recorded image is too dark.
Insufficient light for
shooting.
zSet the flash to (Flash on) (p. 62).
The subject is
underexposed because the
surroundings are too bright.
zSet the exposure compensation to a
positive (+) setting (p. 95).
zUse the AE Lock or spot metering
functions (pp. 93, 96).
Subject is too far away for
flash to reach.
zShoot with the subject within the
correct flash range when using the
built-in flash (p. 205).
zRaise the ISO speed and then shoot
(p. 69).