Filter
Top Products
Shooting Long Exposures
84
Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
1
Choose ≈.
● Follow Steps 1 – 2 on p. 55 to choose ≈.
2
Choose the shutter speed.
● Press the o button.
● Press the qr buttons to select the shutter
speed, then press the m button.
3
Confirm the exposure.
● When you press the shutter button halfway,
the exposure for the chosen shutter speed
will appear on the screen.
Red-eye correction may be applied to areas other than red eyes. For
example, when red make-up has been used around eyes.
• You can correct recorded images (p. 108).
• You can also display the screen in Step 2 by pressing the r button,
then the n button.
• The brightness of the image may differ from the brightness of the
screen in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
• If you attach the camera to a tripod, you should set the [IS Mode] to
[Off] (p. 123).
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.