Filter
Top Products
112
E
Using a Memory Card
(MV4i MC only)
Preventing Accidental Erasure (Protect)
-MV4i MC only-
CARD
CARD
This section describes how to protect the still image from the Card Operation
submenu when displaying an index screen in CARD PLAY mode (including the
way to cancel the setting) .
You can also protect a still image through CARD PHOTO REVIEW ( 110) or
File Operation menu ( 111).
Protecting an image while viewing an index screen
Make sure a memory card that has images recorded on it is inserted into the
camcorder.
1. With an image in the display, press the INDEX SCREEN button.
• Up to 6 images appear in the display.
• Move the mark to the image that you want to protect (Index Screen
108)
2. Open the menu and select CARD OPER.
3. Select
\\
PROTECT .
4. Press the SELECT dial in.
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the SELECT dial again to cancel it.
5. Close the menu.
Note:
• To cancel image protection, move the mark to the protected image and
press the SELECT dial in. The protect mark disappears.
PROTECT
CARD OPER.
( 34)
CARD
PLAY
#5_MV4/MV4 MC-i_E(98-125) 01/7/31 10:34 Page 112 (1,1)