Filter
Top Products
99
E
Using a Memory Card
(MV4i MC only)
Inserting and removing the memory card
1. Turn the POWER dial to OFF.
2. Slide the memory card compartment cover in the direction of the
arrow and open.
3. Insert straight or remove the memory card.
• Push the memory card all the way in.
• Remove the memory card by pushing the card in and letting it spring out.
4. Close the cover.
Do not attempt to pull the memory card out without first pushing it in.
• When you set the POWER dial to CARD PLAY, the last image recorded
appears. If there are no images recorded on the memory card, NO IMAGES
appears in the display.
• Do not touch the memory card terminals.
Selecting the recording image quality
Select the quality of a still image to be recorded.
QUALITY•••••FINE
CARD SET UP
( 34)
VCR
Make sure the POWER dial lock lever is switched to the
2222
position. Open
the menu and select CARD SET UP. Then select QUALITY, set it to
STANDARD and close the menu.
CARD
REC
#5_MV4/MV4 MC-i_E(98-125) 01/7/31 10:34 Page 99 (1,1)