Filter
Top Products
18
E
Mastering
the Basics
The camera’s short operation confirmation beeps are indicated by ` in the
illustrations. Beeps sound upon certain camera operations such as when you turn
the camera on, during the self-timer countdown, right before the camera’s
automatic shut-off, and also upon any unusual condition of the camera. Beeps are
not recorded on the tape.
BEEP••••••••ON
SYSTEM
( 34)
Confirmation/Warning beeps
About the POWER dial lock lever
The POWER dial lock lever has been preset to the 2 position. Switch it to the
22 position when you want to use the P.SCAN ( 49) and CARD REC
(MV4i MC only, 103) modes. We recommend that you return the lock lever to
the 2 position when you finish recording.
MV4 2:PLAY, OFF, MOVIE
22 : PLAY, OFF, MOVIE, P.SCAN
MV4i 2:VCR, OFF, MOVIE
22 : VCR, OFF, MOVIE, P.SCAN
MV4i MC 2:CARD PLAY, VCR, OFF, MOVIE
22 : CARD PLAY, VCR, OFF, MOVIE, P.SCAN, CARD REC
MOVIE
P.SCAN
PLAY
VCR
CARD
REC
CARD
PLAY
To turn the beep off, open the menu and select SYSTEM. Then select
BEEP, set it to OFF and close the menu.
( )
#2_MV4/MV4 MC-i_E(06-32) 01/7/31 9:51 Page 18 (1,1)