Filter
Top Products
148
E
Additional
Information
Appears if you have
tried to mark 51 or
more images for
printing, or if a mark
file cannot be edited.
( 113)
A memory card has
not been inserted
into the camcorder.
( 99)
There are no images
recorded on the
memory card.
You are using an SD
Memory Card and it
is set for erasure
prevention. Change
the position of the
protect switch.
Appears when you
press the start/stop
button in CARD
REC mode. The
image isn’t recorded
on the cassette or
memory card.
NO CARD
NO IMAGES
PRINT MARK ERROR
For MV4i MC only
Appears immediately
after you start
recording, and the
video heads are badly
contaminated. Make
sure to clean the
video heads when
this caution appears.
There is no more
remaining memory
on the memory card.
Change the card or
erase images.
You have reached the
maximum file or
folder number.
( 101)
The image has been
recorded in an
incompatible JPEG
format or other
format that the
camera can not play
back, or the image
data has been
damaged.
An error has
occurred with the
memory card. The
camcorder cannot
record or play back.
A temporary card
error is also possible. If CARD ERROR
disappears after 4 seconds and flashes
red, turn the camcorder’s power off and
back on again, and remove and reinsert the
card. If flashes green, recording or
playing back is possible.
CARD ERROR
IN CARD POSITION
CARD FULL
NAMING ERROR
UNIDENTIFIABLE
IMAGE
THE CARD IS SET FOR
ERASURE PREVENTION
HEADS DIRTY,
USE CLEANING CASSETTE
#6_MV4/MV4 MC-i_E(126-155) 01/7/31 10:38 Page 148 (1,1)