142
E
Additional
Information
Troubleshooting
Refer to this checklist first if you have any problems with your camcorder.
Possible explanations are given for each problem on the list — turn to the page
numbers in parentheses for more information.
Make sure that the camcorder is properly connected if you are using it with a TV
or VCR. Consult your dealer or service outlet if problems persist.
Recording/Playback
Cause and/or what to do about it
• The camcorder is not set to the
appropriate mode ( 19, 29).
• The cassette is not loaded or is set for
erasure prevention ( 17-18).
• The cassette has reached the end.
•
The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
( 12-16, 135).
• The function cannot be used in that
recording program ( 59).
• The camcorder was in record pause
mode for more than about 5 minutes
( 19, 108, 154).
• The battery pack is exhausted
( 13-16, 135).
• The battery pack’s power is
exhausted. Recharge or change to a
new battery pack ( 13-16).
• The cassette is not loaded or is set for
erasure prevention ( 17-18).
• The cassette has reached the end.
• The camcorder is not set to the
appropriate mode ( 19, 29).
• You are attempting to play back or
record copyright protected material
( 90).
• The video heads are badly
contaminated ( 140).
Problem
? Nothing happens when I press the
buttons.
? The camcorder turned itself off.
? The cassette compartment stopped
mid-operation while
loading/unloading a cassette.
? The start/stop button doesn’t
work.
? There’s no picture in the display.
? There’s a blank blue screen in the
display.
#6_ MV550i/530i__E(132-163) 1/9/02 14:55 Page 142