Canon MV530i Camcorder User Manual


 
69
E
Using the Full
Range of Features
7. Select the desired setting.
You return to the digital effects menu.
8. Press the DIGITAL EFFECTS button to close the menu.
The digital effects menu disappears.
MULTI-S flashes in the display.
9. Push the ON/OFF button.
MULTI-S stops flashing.
Manual: As you press the ON/OFF button, scenes will be captured one after
another the indicated number of times. If you push and hold the ON/OFF
button for more than a second, the last image captured will be erased.
The currently recording image is framed in blue. The frame disappears after
the last image is captured.
Automatic: The camcorder will capture the indicated number of images at
the indicated speed.
10.If you’re in TAPE CAMERA mode, push the start/stop button to
begin recording.
The multi-image screen is recorded to the tape.
If you're in CARD CAMERA mode, press the PHOTO button to
record the multi-image screen to the memory card.
Notes:
You can operate the multi-image screen from record or record pause mode.
After all the images have been captured, press the ON/OFF button quickly to
cancel the multi-image screen.
If you are operating the multi-image screen in TAPE PLAY (VCR) mode and
you stop or pause the tape, or press any other playback button or the date/photo
search button, the multi-image screen will be cancelled. (This does not apply
with the MANUAL multi-image speed.)
You cannot use digital zoom or the 16:9 mode when the multi-image screen is
set. The display becomes “– –”.
You cannot use the multi-image screen in the Night recording program.
Multi-image screen on/off
#3_ MV550i/530i__E(39-86) 1/9/02 14:49 Page 69