Canon MV530i Camcorder User Manual


 
145
E
Additional
Information
Miscellaneous
Cause and/or what to do about it
The remote sensor mode is set to
OFFB in the menu ( 50).
The remote sensor modes of the
wireless controller and the camcorder
itself are different ( 50).
The batteries are dead or not inserted.
Check the screen displays ( 150).
External interference may cause the
camcorder’s microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
Remove the cable and then reconnect
it or turn the power off and back on
again.
This is not a malfunction.
Problem
? The wireless controller doesn’t
work.
? The power indicator is flashing.
? The camcorder malfunctions.
? The DV cable is connected
correctly, but there’s nothing in
the display.
? The camcorder becomes warm
during use.
? The PHOTO button doesn’t work.
? The image cannot be erased.
The memory card is not loaded
( 105).
You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
The memory card is full. Erase
images ( 115) or insert a new
memory card.
You have reached the maximum file
number. Set the file numbering to
RESET through the menu ( 107)
and insert a new memory card.
You are using an unformatted
memory card. Format the card
( 127).
The image is protected ( 114).
You are using an SD Memory Card
and it is set for erasure prevention.
Change the position of the protect
switch.
#6_ MV550i/530i__E(132-163) 1/9/02 14:55 Page 145