Filter
Top Products
29
Basic Functions
The image in the LCD monitor may
darken when the monitor is used under
sunlight or other strong lighting. This is
not a defect.
z
The on/off setting of the LCD monitor
display mode is memorized when the
camera is turned off. When the camera is
turned on again it assumes the last
mode. However, when the LCD monitor
is turned on and the "Change the
batteries" message appears, the LCD
monitor may not automatically turn on
the next time the camera is started.
z
Setting the shooting mode to , or
turns the LCD monitor on regardless
of whether it is set to on or off.
z
A slow shutter speed has likely been
selected because of insufficient lighting if
the upper indicator beside the viewfinder
blinks orange after the metering
preparations are complete and the
camera shake icon displays in the
LCD monitor. Set the flash to or ,
or affix the camera to a tripod to shoot.
The following information may be displayed,
depending on the image.
Shooting Mode p. 35
Exposure Compensation
p. 65
White Balance p. 66
ISO Speed p. 69
Photo Effect p. 70
Resolution (Movie) p. 36
Flash p. 38
Light Metering Mode
p. 65
Macro/Infinity p. 40
In addition to the above, the histogram and recorded
movie time are displayed.
An audio file other than a wave file, or a file
with unrecognized format is attached.
A JPEG file not supported by "Design Rule
for Camera File System" standards.
RAW file format
Unrecognizable file formats