Filter
Top Products
25
Basic Functions
Turning the Power On/Off
1
Press the ON/OFF button until the
power indicator lights green (p. 16).
Shooting Mode
z Current shooting settings will appear in the
LCD monitor for about 6 seconds.
If you turn the mode switch to , the lens
will retract after approximately 1 minute.
Playback Mode
z The LCD monitor displays an image.
Turning the Camera Off
z Press the ON/OFF button again to turn the
power off.
z You will hear a start-up sound and see
the start-up image when the power
comes on. (To change the start-up
sound and image, see below and pages
72 and 115.)
z The start-up image does not appear
when the LCD monitor is off in Shooting
mode or the A/V OUT terminal is
connected to a TV.
Turning on the camera without the start-
up sound and image
Press and hold the SET button, then
turn on the power.
Power Saving Function
This camera is equipped with a power saving
function. Depending on the power saving setting
(p. 70), the camera may power down or the LCD
monitor may go off automatically.
zAuto Power Down
[On]:
Shooting mode:
Powers down approximately 3 minutes after the
last time a camera control is accessed.
Playback mode:
Powers down approximately 5 minutes after the
last time a camera control is accessed.
Printer connection mode:
Powers down approximately 5 minutes after the
last time a camera control is accessed or
something is printed on the printer.