Filter
Top Products
29
Basic Functions
Shooting Mode
p. 38, 74
Exposure Compensation
p. 80
White Balance
p. 81
Drive Mode
p. 45, 47
ISO Speed
p. 84
Photo Effect
p. 85
Light Metering Mode
p. 79
Compression
p. 40
Resolution
Postcard Print
p. 40
p. 53
Flash
p. 42
Red-eye Reduction
p. 43
Macro Mode
p. 44
Manual Focus
p. 89
Auto Rotate Function
p. 91
Movie Recording Mode
p. 55
(PowerShot A85)
4.3x 5.3x 6.7x 8.2x 11x
(PowerShot A75)
3.8x 4.8x 6.0x 7.4x 10x
Digital Zoom Setting*
2
p. 46
Camera Shake Warning
p. 16
Low Battery
p. 19
zWhen a Shooting mode setting is changed, the
settings appear on the LCD monitor for about 6
seconds even if the LCD monitor is set to No
information or off. (The Shooting mode settings
may not appear depending on the camera
setting.) You can set the flash, Macro mode, and
the manual focus settings while this information
appears on the LCD monitor.
z and the icons in the above appear
even when the information view is turned off.
zIn addition to the above, the AF frame, spot light
metering frame, shutter speed, aperture value,
recordable images or recordable movie time are
displayed as in the example to the left.
zSetting the mode dial to or modes turns
the LCD monitor on regardless of whether it is set
to on or off.
zA slow shutter speed has likely been selected
because of insufficient lighting if the upper
indicator beside the viewfinder blinks orange after
the metering preparations are complete and the
camera shake icon ( ) displays in the LCD
monitor. Set the flash to or , or affix the
camera to a tripod to shoot.
zAfter you take a photo by fully pressing the
shutter button, the image displays on the LCD
monitor for approximately two seconds (or the
review duration you set from 2 to 10 seconds). If
you press the SET button while the image is
displayed, it will continue to display (p. 36).
*1 : The icons of all the
SCN
mode options appear (p. 51).
*2 : Zoom powers reflect the combined optical and digital zoom
effects. These figures appear when the digital zoom is activated.