Filter
Top Products
1. Preparing the Camera 19
a
aa
aSelect [OK] using the W
WW
W or X
XX
X arrow
on the omni selector, then press the
SET button.
The indicator blinks red and formatting starts. Wait
until the indicator goes off.
zTo cancel instead of erasing, select [Cancel] and
press the SET button.
b
bb
bPress the MENU button.
b
a
Indicator
Turning the Power On/Off
The power/mode indicator remains lit while the power of
the camera is on. The power/mode indicator indicates
the state of the camera as follows.
Orange:Shooting mode
Green: Playback mode/Printer connection mode*
Yellow: Computer connection mode*
Off: The power of the camera is off.
*
For printer connection mode, see the Direct Print
User Guide. For computer connection mode, see
the Software Starter Guide.
You will hear a start-up sound and see the start-
up image when the power comes on (p. 111).
The start-up image does not appear when the
viewfinder display is on in Shooting mode or
the A/V OUT terminal is connected to a TV.
Be careful not to touch the lens when shooting.
Please also refrain from forcing the lens with
fingers or other objects. It could lead to
malfunctions or damage the camera. If this
occurs, turn the camera off and back on.
Turning on the camera without the start-up
sound and image
Press and hold the button, then turn on the
power. You can also turn the power on with the
LCD monitor closed.