Filter
Top Products
2. Shooting-The Basics 35
a
aa
a
Press the button to switch between
flash modes and shoot the image.
The selected flash mode appears on the LCD
monitor (or viewfinder).
zYou can switch between settings by pressing
the button. The flash setting may not switch
with certain shooting modes.
When the red-eye reduction function is on (p. 36)
When the red-eye reduction function is off
zBe sure to close the flash after use.
a
When the Flash Pop-up Function is Set to [Off]
You can manually set the flash when Flash
Pop-up is set to [Off].
a
aa
aPop up the flash by pressing the
button and shoot the image.
b
bb
bWhen you are not using the flash,
press the flash down until it clicks.
Mode Dial
Flash is open ( ) The flash always fires.
Flash is closed ( ) The flash does not fire.
a
b