Filter
Top Products
55
Advanced Functions
Recording
E
Audio Recording
Changing the Audio Mode
You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later. Select the 16-bit mode for higher sound quality.
1. Open the FUNC. menu, select ( ) the icon and press ( ).
2. Select ( ) the [AUDIO SETUP] menu and press ( ). Then, select
( ) the [AUDIO MODE] option and press ( ).
3. Set ( ) it to [16bit] or [12bit] and press ( ) to save the changes,
then close the menu.
The selected audio mode is displayed for approximately 4 seconds.
Wind Screen
The camcorder reduces the wind noise automatically. However, you can turn off the wind
screen when recording indoors, or when you want the microphone to be as sensitive as
possible.
* Only when [AUDIO DUB.] is set to [MIC.IN].
1. Open the FUNC. menu, select ( ) the icon and press ( ).
2. Select ( ) the [AUDIO SETUP] menu and press ( ). Then, select
( ) the [WIND SCREEN] option and press ( ).
3. Set ( ) it to [OFF] and press ( ) to save the changes, then close
the menu.
“ ” appears when you turn the wind screen off.
MENU
(36)
AUDIO SETUP AUDIO MODE 12bit
MENU
(36)
AUDIO SETUP WIND SCREEN AUTO
*