Canon DXC-D35K, D35PK, DXC-D35L, D35PL, DXC-D35WSL, D35WSPL, DXC-D35H, D35PH Digital Camera User Manual


 
52 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Displaying the advanced menu and
switching to the normal indications
Use the following procedure to display the advanced
menu.
1 Move the POWER switch to the ON position while
holding down the UP/ON button to display the
advanced menu selection screen.
2 To display advanced menu page 2
immediately, move the cursor to the menu
number and then press the DOWN/OFF button.
To reinitialize all settings in the advanced
menu to their factory defaults
1 Align the cursor to ALL RESET and press the UP/
ON button.
(The indication changes to “ALL RESET
SURE?”.)
2 Press the UP/ON button again. (The indication
changes to “ALL RESET OK” and reinitialization
completes.)
To cancel the reinitialization, move the cursor
instead of pressing the UP/ON button.
Display by moving the
POWER switch to the
ON position.
Normal indications
Page 1
Page 2
Page 8
a)
Switch by pressing the
MENU/STATUS switch up.
Switch by pressing
the MENU/STATUS
switch down.
Basic menu
Display by holding the
MENU/STATUS switch up
while the normal
indications are present.
a) The menu configuration differs according to the camera
head’s switch settings, the connected VTR, and the type of
input signal. An eight-page configuration results when all of
the basic menu pages are displayed.
c
TITLE IND?
(YEScv)
c
A.IRIS : ± 0
DTL LEV: ± 0
M.BLACK: ± 0
STRETCH: ± 0
SHUTTER: OFF
c
SKIN DTL: OFF
DL LEV : STD
PRE.WHT : 3200
REC
TAKE
TCG 12:34:56:00
W:A
NG
CLIPM
198
F5.6
0dB
56ND
:LOW LIGHT 99 04 01
SS :1/100 10:00
AM
WHITE : AUTO/A
A.IRIS: STD
FILE : STD
DCC+ : OFF
SS :OFF
BATT:13.0V
Status indications
Viewfinder Screen Indications